Nanosurf easyScan 2 AFM, Руководство по эксплуатации

Страница: 141 / 164

T
HE
T
OOL
R
ESULTS PANEL
141
Quick Evaluation Tools
The easyScan 2 software has several tools that allow quick evaluation of a
measurement while it is being acquired. This helps find optimal measure-
ment settings. For more elaborate evaluations, the optional Nanosurf Anal-
ysis or the Nanosurf Report software package can be used (section
Creating
a report (p.153)).
The quick evaluation tools are activated using the Tools bar or the Tools
menu. The number of tools available depends on the type of the currently
active chart. The evaluation results are displayed in the Tool Results panel.
IMPORTANT
All results are calculated after the ‘Data filter’ has been applied to the data.
The results will generally vary when a different ‘Data filter’ option is used.
The Tool Results panel
The Tool Results panel displays the results of the currently active tool. The
panel should automatically become visible when a tool is selected. To make
the panel visible, click in the navigator. The contents of the tool results
panel depend on the tool that is active. It will always contain a Cursor posi-
tion and a Tool status section, and may also contain a Tool result and a Tool
chart section. Because the content of the Tool Results panel depends so
strongly on the active tool, this panel is described in more detail with each
of the tools.
The Tools bar
Properties of the measurements can be evaluated numerically using the
tools. The tools are activated via the corresponding menu item or by click-
ing the respective button in the tool bar. Tools can be used in all charts,
both during measurement and off-line. Before using a tool on a chart, acti-
vate the chart by clicking onto it. To stop using a tool, select another tool,
or click its button a second time.