EN
3
WWW.NAKAYAMATOOLS.COM
Important information
1. Please read through the manual carefully.
2. Battery can only be charged indoors.
3. Double insulation, grounding not required.
4. Fail-safe transformer charger.
5. Battery charging will automatically cut off when overheating occurs.
6. Dispose battery charger separately from household waste.
7. Dispose battery separately from household waste.
Product Description
This product is a battery-driven electric pruning shear, comprises components designed for cutting or trimming 45mm or less branches in fruit orchards, vine-
yards, etc. Simple and easy to operate, it also has 8-10 times the efficiency of traditional manual pruners. Pruning quality is significantly higher as compared
to manual pruners.
Please read through all the safety warnings an instructions carefully.
Failure to follow warnings and instructions may result in electric shock, fire and serious burns and other accidents.
Do not use or expose electric pruning shear in rainy conditions.
Never place hands near the cutting area of the electric pruning shear during operations.
Product Components
1. Movable blade
2. Fixed blade
3. Latch pin
4. Trigger
5. Fixed power cord
6. Lubrication hole
7. Charger AC plug
8. LED light indicator
14. Electric Pruning Shear’s power input connector
15. Control Housing’s output plug
16. Control Housing’s input plug
18. Buzzer
19. Blade opening adjustment switch (Large: 45mm/1.8” Small: 25mm/1”)
Product Operation
1. Take the specially backpack (picture 1), put the electric pruning shear into the holster and put the battery into the battery bag.
2. First, align the power cable connector’s input connector jack connects to the control housing’s output connector jack on the work vest. Then, control hous-
ing’s input connector jack connects to the battery’s output connector jack.
3. Remove the pruner from the holster, switch ON the battery, to power On position, Due to the first time usage that the control housing gets power, it will
buzz for 2 times, double click the trigger, the pruner blades will automatically open.
4. Normal pruning: press trigger to close the blades and release the trigger to open blades.
Switch blade opening: continue to press the trigger, one buzz means the blade will open to small- 30mm. continue press the trigger, two buzzes means the
blades will open to big 45 mm.
Blade closure: continue to press the trigger, a continual buzz means the blade will stay closed.
Switch off the buzzer sound: Press the trigger and let it buzz for 3 times, the buzzer sound will turn off.
5. Before operation, in order to see if the pruner functions well, please press the trigger to close and release the trigger to open the blades without cutting
anything. Repeat this for a few times.
Failure tips
Buzzer Sound Frequency
Times
Failure
Solution Method
1
Battery capacity failure
Check if battery capacity
is low
2
Communication failure
Check if every part of
cable connector is loose
3
Blade failure
Oil on blade
4
Motor phase loss
Send it to local dealer for
maintenance
5
Motor phase line
short-circuit
Check if cable or head of
the connector has short
—circuit caused
6
Control Housing failure
Send it to local dealer for
maintenance
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice
unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of
the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and
may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the
manufacturer.
