Nachi EZ-CFDL Series Скачать руководство пользователя страница 71

Страница: 71 / 84

7.3 Supplemental items

7.3.3

Simultaneous control and Synchronization control (Synchro-motion)

If the Synchro-motion function is enabled, the following 2 types of movement command can be used.
Please be sure that the motion path and the posture of the robot will change when “H” is set to ON or OFF.

(NOTE) In both cases, the shortcut motion is based on the “Spped Piling Rate” method.

No.

Name

Motion

Display example

Simultaneous
(No “H”)

< No synchromotion>

This is the same with the normal
motion. (The synchro-motion is not
executed) Each mechanism moves
independently.

“H” is not displayed.

Synchro-motion
(With “H”)

The synchro-motion is executed. All
mechanisms will follow the motion of
the Operation Standard Mechanism.

“H” is displayed.

The “H” mark can be turned ON/OFF in the program edit screen.

Set the cursor and …

Turn ON the “H” mark by [1] [Enter]

Or turn OFF the “H” mark by [ 0] [Enter]

Содержание EZ-CFDL Series





















































































Результаты поиска

Содержание EZ-CFDL Series

Отзывы:

Nachi EZ-CFDL Series, Инструкция по эксплуатации, Страница: 71 / 84

Результаты поиска

Содержание EZ-CFDL Series

Отзывы: