NAC Image Technology ST-839, Руководство пользователя

Страница: 66 / 370

Start Recording (ARM mode)
3-20
(00400)
LCD STATUS Display
The information for the current recording settings appears.

MODE ： ARM (current camera mode)

FRM RATE ： Displays current Record Rate

FRM SIZE ： Displays current Image Size

SHUTTER ： Displays current Shutter Speed

TRIGGER ： Displays current Trigger Timing Settings

ID ： Displays current ID Number

SCENE ： Displays current Scene Number to be Recorded

PLAY ： Displays Playback Rate

FRAME ： Displays Frame Number just before STOP mode
（ +0000 ）

TIME ： **/**/** **:**:**.******

SEGMENT ： Displays current Memory Segment

The playback range bar is not displayed.
Operating Panel Display

The word ARM above the VIEW/ARM button flashes.

Camera recording settings cannot be changed in the ARM mode. Select the STOP mode and then
change the camera recording settings.
The noise of the image from the image sensor of the MEMRECAM HX-7 changes according to the speed. This
noise is called fixed pattern noise, which has a different pattern from each sensor. The HX-7 reduces noise by
correcting the fixed pattern noise as well as noise from temperature variations. The correction value used for
this correction is called the black balance. With the HX-7, the black balance is automatically obtained with
the sensor when “switching to the VIEW mode”, “switching to the ARM mode” and “when REC is finished”.
• Manually obtain the black balance （

A
4-23 ）
• Automatically obtain the black balance （

A
8-25 ）
ARM Mode J-PAD3 Display
Black Balance has been previously explained in the Black Balance section