NAC Image Technology ST-839, Руководство пользователя

Страница: 12 / 370

Safety Precautions
10
(00400)
■ Warning Labels
There are warning labels located on the Memrecam HX-7 camera that require precautions for safe use.
Please read these warnings before operating. Please read the HXLink Users Guide or Instruction Manual for
safe and proper use. Contact your service center for additional questions.
This describes the symbols shown on the warning labels.
● Safety Alert symbol
This is an alert for users of the potential danger that can occur when using the
camera. Carefully read the message next to this symbol and follow the instructions
for safe use of the camera.
● Grounding Terminal symbol
Indicates the site of a protective grounding terminal. If not grounded, electrical
shock may occur from the metal housing or other parts of the camera.
Make sure to ground the camera whenever possible to avoid electrical shock.
● High Voltage Warning symbol
Indicates the area of high voltage that is dangerous if touched. When replacing
fuses in the AC Power Adapter make sure to unplug the power cable from the outlet.
Do not open the cover. Depending on the device some parts may generate high
voltage internally so opening the cover may result in electrical shock.
■ Regular Replacement of Parts
・ Clock Battery
The internal clock battery for the MEMRECAM HX-7 will last approximately 5 years. Replacement cannot be
performed by users. Contact your service center for replacement.
・ Memory Backup Battery
Replace the memory backup battery with a new battery about 1 year after purchase. But if you notice a quick
discharge or something abnormal in operation replace it immediately. Contact your service center for
replacement.
■ Warranty Information
The warranty is valid for one year after purchase.
See the attached warranty for details.
Symbols Used on Warning Labels