NAC Image Technology ST-839, Руководство пользователя

Страница: 11 / 370

Safety Precautions
9
(00400)
Using the AC adapter
● Do not interfere with the release of heat from the AC adapter
(The AC adapter is cooled by a fan. Do not block the intake ports or vents. Additionally, do not
place in narrow locations where there is no air circulation, or on carpet or bedding. If heat
builds up inside, malfunction or fire may occur. )
● Usage environment

Do not use in locations with smoke or flammable or corrosive gases, or strong magnetic fields

Do not put in locations subject to direct sunlight, rain or salt water.

Do not use in dirty, dusty or humid locations.
● Check the input power
(Check the power voltage, wavelength and polarity before connecting the AC adapter to an
AC100~240V, 47~63Hz power source.)
● Before using, check the ambient temperature of the location where used and stored

Use temperature range ： 0 ～ 70
℃
, humidity 5 ～ 95%RH, no condensation

Storage temperature range ： -40 ～ 85
℃
, humidity 10 ～ 90%RH, no condensation
● Make sure to ground the device
(Make sure to ground the AC3 pin connector. If not grounded, electrical shock may occur when
the HX camera or GX-HUB is touched.)
Handling the AC adapter when moving or transporting
● Make sure the power is turned off and the cable is disconnected
(Make sure the power is turned off when moving the AC adapter, and move it after
disconnecting the cable. Fire or electrical shock or malfunction may occur.)
Problems may occur depending on the use of and conditions of the camera. Therefore, carefully read this
manual in addition to HXLink Users Guide regarding handling the camera and use of peripheral devices.
Contact your service center for additional questions about the use of the Memrecam HX-7 camera.