NAC Image Technology ST-839 Скачать руководство пользователя страница 210

Страница: 210 / 370

Saving Video Files

7-8

(00400)

■

Save as MCFF File

１

Access the SAVEMENU

(



3-11)



Access TOP MENU

＞

SAVEMENU from the STOP mode.

２

Set the save range

(



7-5)

３

Select FILETYPE with the up/down arrows
and select MCFF with the left/right
arrows



Use the up/down arrows to move to the
selected item (reverse display) and select
FILETYPE.



Use the left/right arrows to select MCFF.

４

Select DOWNLOAD with the up/down
arrows
and press the SET button



After selecting DOWNLOAD, press the SET
button to display the USB save screen.



The save range is displayed on the USB save
screen and SET in the 4

row to the right of

SAVE?: flashes.

５

Press the SET button



Press the SET button to start saving to the
USB media.



After starting to save, the file name is
displayed in FILE.



The progress bar for the status of the save is
displayed at the bottom of the screen.

６

Press the SET button once saving is
complete



Once saved, the display on the 4

row SAVE?

switches to COMPLETE.



Press the SET button to end saving and return
to the SAVE MENU.

Press the STOP button to stop saving. The save will be interrupted and it will return to the SAVE MENU.

Содержание ST-839



















































































































































































































































































































































































Результаты поиска

Содержание ST-839

Отзывы:

Бренды по названию

Популярные бренды

NAC Image Technology ST-839, Руководство пользователя

Результаты поиска

Содержание ST-839

Отзывы:

Бренды по названию

Популярные бренды