NAC Image Technology ST-839, Руководство пользователя

Страница: 64 / 370

Basic Recording Settings
3-18
(00400)
■ Select the Trigger Timing
Set the trigger timing for capturing the event.
The type of Trigger Timing depends on the number of frames recorded from the start of recording to when
the trigger is received and the number of frames recorded from the trigger input to the end of the recording.
１
Access the VIEW mode or STOP mode

Switch to the STOP or VIEW mode. (

A
3-13)

The status is shown on the J-PAD3 display.
２
Press the TRIG button to select the trigger timing

Press the TRIG arrows up or down to switch the trigger timing.
Trigger Timing
Start trigger (START)
： Use a START Trigger for starting a recording immediately after trigger
input.
Center trigger (CENTER) ： Use a Center Trigger for recording pre and post images after trigger input.
End trigger (END) ： Use an END Trigger for recording images after trigger input (ending upon
trigger input).
Custom trigger (+000%) ： Custom setting by user.
Post trigger (000000001) ： Use a Post Trigger to record after a set time or number of frames after
trigger input.
Read section
A
4-17 “Set Trigger Timing” for details on trigger timing.
The Trigger Timing and Custom and Post Trigger values can be changed from MENU.

Go to (

A
4-20) to set the Trigger Timing from MENU.

Go to (

A
4-21) to set Custom Trigger values.

Go to (
 A
4-22) to set the Post Trigger values.