NAC Image Technology ST-839, Руководство пользователя

Страница: 8 / 370

Safety Precautions
6
(00400)
Using the Memrecam HX-7 camera
● Do not dismantle or alter
Do not loosen screws on the main camera unit or open the cover.
⇒ Contact your service center for inspection ・ maintenance ・ repair.
● Do not use in locations with smoke, flammable or corrosive gases and strong magnetic fields
A malfunction, injury or fire may occur.
⇒ Do not use in dirty, dusty or humid locations.
● Do not subject to strong vibration or impact
The MEMRECAM HX-7 does not have vibration or impact resistance properties based on actual
impact testing. If subjected to strong impact or vibration a malfunction or injury may occur.
⇒ Contact your service center for use in harsh environments.
● If there is a malfunction turn the power off and unplug the AC adapter
If water or foreign matter gets inside, if the exterior breaks due to dropping, if the camera
becomes hotter than normal, or if smoke, odors or noises are emitted. The camera becomes
warmer during operation and is not considered to be a malfunction.
⇒ Contact your service center.
Using the cables
● Do not unplug the camera power cable with the power on
● Do not put foreign articles such as metal, trash or water inside the connector.
A malfunction or electrical shock may occur if the cable is connected or removed with the
power on.
⇒ Unplug the camera power cable only after turning off the power.
● Do not touch the plug or connector with wet hands
A malfunction, electrical shock or fire may occur.
Verify input power
● Verify the input power before connecting

During AC adapter use ： AC100 ～ 240V/47 ～ 63Hz

During DC power connection ： DC20 ～ 32V
A malfunction, electrical shock or fire may occur if connected to the wrong power supply.