Mylex FlashPoint BT-930, Руководство по установке и инструкция пользователя

Страница: 45 / 70

Adapter and Device Configuration
Manual No. 3000863 3-19
The left side of the screen shows the static characteristics of the
selected device. These characteristics can not be modified. See
Table 3-4 for a brief description of these parameters. Refer to the
owner’s manual of your device for further information about the
contents of this display.
3. Use the <Page up> and <Page down > keys to change the display to the
other SCSI devices on the SCSI bus.
The right side of the screen shows the devices configuration parameters
that can be modified. See Table 3-3 for a list of the parameters and their
values. Default values are shown in
BOLD ITALIC TYPEFACE .
To change the configuration parameters, do the following:
1. Use the arrow keys to highlight a parameter and press the <Spacebar>.
Parameters that can be toggled ON and OFF change when selected.
2. SCSI ID and Negotiated Rates have selectable values. Highlight the
Table 3-4. SCSI Device Static Parameters
Parameters Description
Vendor ID The name of the device manufacturer.
Product ID The device’s model name.
Firmware Version The device’s firmware version number.
ANSI Version The SCSI level of the device.
Synchronous Mode Indicates if synchronous mode is supported by the device.
Wide Negotiation Indicates if wide negotiation is supported by the device.
Command Queue Indicates if command queue is supported by the device.
Device Type The type of device.
Capacity (MB) The number of megabytes of storage in the device.
Sector Sz (Bytes) The sector size of the device in bytes.
SCAM Indicated if SCAM is supported by the device.
Transfer Rate The data transfer rate of the device shown in MB/sec.