Mylex FlashPoint BT-930, Руководство по установке и инструкция пользователя

Страница: 19 / 70

Installation
Manual No. 3000863 2-5
☛
Note
The FlashPoint adapter can only be installed in a
busmaster slot. Refer to your system documentation to
determine the correct slot for installation.
Step 2: Install the adapter
Press the FlashPoint adapter into the selected PCI slot (see Figure 2-2).
Align the mounting bracket, and reinstall the mounting screw.
Figure 2-2. FlashPoint adapter Installation
m
Caution
Make sure that the board is properly seated in the slot.
Step 3: Install internal devices and cables
Internal devices require a 50-pin flat ribbon cable. Use the ribbon cable
included with the FlashPoint to install one or two internal devices. Install
one end of the ribbon cable to the 50-pin double-row SCSI connector on the
FlashPoint host adapter (see Figure 2-3).
Before plugging in the cable, check that the “
▼
” mark molded on the
connector or the colored stripe on the cable (indicating the location of Pin 1)
matches Pin 1 of the connector on the board.