mychefcooking.com
PRODUCT MANUAL BAKERSHOP - DT.MP.BS.2103.2
50
It is advisable to clean the inside of the outer glass and the inside glass on the outside with
glass cleaning fluid and hand paper. For the inside of the inner glass, if the dirt is not
excessive, you can proceed in the same way as the other glass. If there is a lot of dirt, an
automatic cleaning cycle can be done to remove this excess dirt.
Once cleaning is complete, the inner door can be closed and secured with the staples.
For the stainless-steel housing use a cloth dampened in a mixture of water and detergent,
or specific detergent for stainless steel.
8.2.
Preventive maintenance
Mychef ovens are designed for intensive and long-lasting operation. For this to happen, in
addition to regular cleaning tasks, preventive maintenance must be carried out. This
preventive maintenance is specifically designed to prolong the life of your Mychef oven,
minimize energy and water usage, and ensure excellent cooking quality without
interruption.
This maintenance program is segmented into four types of revisions, A, B, C and D, which
should be performed approximately every year or 2.000 working hours, whichever comes
first.
These periodic reviews should be carried out every 2.000h of work or every
year, whichever comes first.
These periodic checks must be carried out by an authorized service
technician.
The following table shows the operations to be performed on Mychef ovens at each of the
revisions. The table is circular, and from 20.000h of use or 10 years would start counting
again on the left of the table. That is to say, at 22.000h it would correspond to revision A of
2.000h.
Cleaning the oven with a pressure washer is harmful to the equipment and
could result in breakage and void the warranty of the equipment.
Do not use the hand shower accessory on the door glass while it is hot, there
is a danger of breakage due to thermal shock.
Never use cold water to wash the interior of the cooking chamber when it is
above 70ºC. Thermal contrast is harmful to the equipment and would void
the warranty of the equipment.