mychefcooking.com
PRODUCT MANUAL BAKERSHOP - DT.MP.BS.2103.2
26
Figure 20. Example, program 1
Then slightly press the PROG key to display the program settings. You can also slightly press
the START/STOP key to start the program directly.
6.1.8.
Quick memories
The oven has 8 quick access memories, independent of the programs, numbered from M1
to M8.
To save a quick memory, set the humidity, temperature, time, and speed of each of the
phases you want. Then press the button in the memory where you want to save the settings
for two seconds.
To start a cooking process stored in quick memory, slightly press the key of the memory you
want to execute.
In firmware versions 1.7 and higher, the quick memories correspond to the programs. That
is, P1 stores the same cooking parameters as M1, etc. In previous versions, the memories
are independent of the programs.
6.2.
NightWatch
NightWatch allows the oven to automatically continue a cooking process after a power
failure. This functionality is especially useful for unattended cooking.
This function will only continue with one cooking in the event of a power
failure and subsequent recovery of the power supply.
This function can be disabled by your dealer. Make sure that you fully
understand the risks of its use.
When a power failure and subsequent restoration of the power supply occur, the oven
recovers the cooking in progress (if any) and continues it with the same parameters as
before the power failure.