18
11. FITTING ThE FRONT COVER
IMPORTANT:
it is necessary to align the
Multi pin connector and connect the flying
lead from the PCB to the rear of the front
cover.
hold the front cover carefully
and
attach the flying lead from the control
PCB
(ensuring that the lock tags are
aligned with the slots on the display
PCB connector)
to the rear of the front
cover as illustrated making sure that the
connector pins are fully engaged.
The cover can now be fitted and secured
with the four fixing screws provided.
Following the installation of the riser rail
(see section 12) attach the flexible hose to
the shower outlet positioned centrally on
the back plate making sure that you use
the seal washer provided. The shower is
now ready for commissioning.
Thermostatic Care
QI
Temperature
Flow Control
START/STOP
Temp
erature
FLOW
