1
4
7. Guide to Operating the Ice Maker
Fig. 10 Switch
Fig. 11 Ice cube
Initial operation
①
Open the water supply valve connected to the ice maker.
②
Insert the plug of the ice maker into the electric outlet.
③
Open the door and turn the switch to the “ICE” position.”
④
Discard the first batch of ice.
⑤
Good quality ice will be produced within1-2 hours.
Using the ice maker
Use of the ice maker is very simple. Simply turn the switch to the “ICE”
position.
The product automatically starts ice production, which continues until
the ice container has been filled with ice. Remove the ice
using an ice scoop and insert the scoop into the holder on the inside of
the container when not in use. (Do not leave the scoop in the ice).
The ice maker produces 24 pieces of ice every 30 minutes.
Also, the produced ice drops down into the ice container;
water is supplied to the ice maker and the water is also
drained.
Important Information : Do not put anything other than
ice in the ice container. Wine or beer bottles are unsanitary
and a detached label may block the drain.
Ice
The ice has a rectangular bell shape (refer to the figure). Newly
produced ice is clear and transparent. The inside of the ice is
sometimes cracked; however, such cracks commonly occur in the
production process and disappear with time.
Ice stored in the container for a long time may gather frost on the
outside and look cloudy. This is normal and, once water is poured on
the ice, the frosting disappears.
Ice container
The product continues making ice until the level of ice reaches the
temperature sensing tube(right side). It then ceases operation.
