1
8
■
Cleaning the filters of the water trough and ice bin
5. Clean the gap of the nozzle frame fixed
on the vessel sheet (water trough).
6. Lift the drain plug inside the vessel sheet
(water trough), clean it, and drain the
water.
*
Make sure that the drain plug is assembled
back in the correct position after cleaning;
otherwise, draining will not stop, and the
product will be unable to make ice cubes.
1. Empty the ice bin and prepare a cleaning
solution by distilling 1oz of neutral
dishwashing detergent with 8qts of warm water
(95~115F). Soak a clean cloth in the solution
and clean the inside of the ice bin.
Pour an appropriate amount of the solution
into the drain hose, and then wait until
it dries naturally.
*
Press the switch to set it to “
Ⅱ
”(WASH) when cleaning the product;
this will repeat the process of supplying water for about 2 minutes and operating
the circulation pump 3 times, enabling easier cleaning.
Cleaning the nozzle / ice slide / water trough
- Clean at least once a month after turning off the power.
For your
information
