1
0
4. What to check prior to installation
■ Follow this process! ■
115V
,
60Hz
For your
information
-
The water supply valve may have different shapes depending on the installation condition.
-
The filter may be located close to the water source or back of the product depending on the situation.
-
Be sure to connect the water supply adaptor to the cold water supply.
-
The ice maker provides optimal functionality at room temperature of
50~100
℉
and supplied water temperature between 50 - 90
o
F.
Water source valve
Water source tube
Drain hose
Connecting water piping
-
Too high temperature of the ice-making water will decrease the amount of ice produced;
too low pressure will prevent ice from being made at all. Install an auxiliary pressure pump
in this case.
-
In order to guarantee optimal operation of the product, consult with our
technician on how to install the product. (Contact our authorized technician in
case of moving the product after the initial installation.)
Appropriate water temperature Water pressure
Appropriate
piping / hose size
Ice making water supply
50 ~ 90
℉
20 ~ 80 psig
3/8" FPT
Ice making water drain
-
-
3/4" FPT
Avoid uneven surface or any place with too much moisture,direct
sunlight, too much dust, or water splatter.
Water inlet: Ice making water supply 3/8”FPT
Drain connect: 3/4”FPT
