background image

2

6

 

12. Manufacturer Warranty

Ice Machine Limited Warranty

Subject to the exclusions and limitations below, MVP Group warrants to the original consumer that any new 
ice machine shall be free of defects in material or workmanship for the warranty period outlined below, 
under normal use and maintenance, and upon proper installation and start up in accordance with the instruction 
manual supplied with the product.

Who is covered?

This limited warranty only applies to the original consumer of the product and is not transferable.

What are MVP Group

s obligations under this limited warranty?

If a defect arises and MVP Group receives a valid warranty claim prior to the expiration of the warranty 
period, MVP Group shall, at its option: (1) repair the product at MVP Group

s cost, including straight time 

labor charges, (2) replace the product with one that is new or at least as functionally equivalent as the 
original, or (3) refund the purchase price for the product. Replacement parts are warranted for 90 days or 
the balance of the warranty period, whichever is longer. The foregoing constitutes MVP Group

s sole obligation 

and the consumer

s exclusive remedy for any breach of this limited warranty. MVP Group

liability under this limited warranty is limited to the purchase price of the product. Additional expenses including, 
without limitation, service travel time, overtime or premium labor charges, accessing or removing 
the product, or shipping are the responsibility of the owner.

U

nits

 sold in the  United States, Canada, and Puerto Rico 

 shall be covered for 12 months parts and labor 

from the date of sale.

NOTE:

 

Units

 sold outside of the covered zones (United States, Canada and Puerto Rico) 

               

shall be warranted for 

12

 months parts only from the date of sale.

What is not covered? 
This limited warranty does not cover, and you are solely responsible for the costs of: (1) periodic and/or 
routine maintenance, (2) repair or replacement of the product or parts due to normal wear and tear, (3) 
defects or damage to the product or parts resulting from misuse, abuse, neglect, or accidents, (4) defects 
or damage to the product or parts resulting from improper or unauthorized alterations, modifications, or 
changes, and (5) defects or damage to any product that has not been installed and/or maintained in 
accordance with the instruction manual or technical instructions provided by MVP Group. To the extent that 
warranty exclusions are not permitted under some state laws, these exclusions may not apply to you.

This limited warranty is the sole and exclusive warranty of MVP Group with regard to the product. All 
implied warranties are strictly limited to the duration of the limited warranty applicable to the products 
as stated above, including but not limited to any warranty of merchantability or of fitness for a particular 
purpose. In no event shall MVP Group or any of its affiliates be liable to the consumer or any other 
person for any incidental, consequential, or special damages of any kind (including, without limitation, 
loss of profits, revenue, or business) arising from or in any manner connected with he product, any 
breach of this limited warranty, or any other cause whatsoever, whether based on contract, tort, or any 
other theory of liability. Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you.

Содержание KOOL-IT KRU-70-AB





























Отзывы: