Muton Falcon II RJ-8000 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 70

background image

Falcon II RJ-8000 Operation Instructions

9

AP-75080, Rev. 1.1, 04/12/02

1. REGULATORY AND SAFETY

INFORMATION

1.1. EMC STATEMENT FOR CE MARKING.

WARNING :

•

This is a Class A product approved for industrial environments. In a domestic
environment this product may cause radio interference in which case you may
be required to take adequate measures.

1.2. PRECAUTIONS.

This equipment complies with radio interference regulations for data processing devices. When used in a
residential area, this equipment may cause radio interference, in which case the user may be required to
take appropriate corrective measures.

Concerning radio interference

This product generates weak radio signals and may interfere with radio and television reception if not
installed and used correctly. If you suspect that it is causing interference with radio and television reception,
try one or more of the following measures:

•

Change the direction of your reception antennae and feeders

•

Change the direction of this product

•

Change the distance between your receiver and this product

•

Use separate power supply circuits for your receiver and this product

Trademarks mentioned in this manual

•

MUTOH, Falcon Graphics, Falcon II, RJ-8000, MH-GL, MH-GL2, MH-RTL are trademarks or product
names of MUTOH Industries Ltd.

•

Centronics, Bitronics are trademarks or product names of Centronics Data Computer Corp.

•

Windows 95, Windows 98, Windows NT 4.0, Windows 2000 and MS-DOS are trademarks or product
names of Microsoft Corp.

•

DOS-V is a trademark or product name of IBM (International Business Machines Inc.)

•

Other names of companies or products are trademarks or product names of the respective companies.

Important :

•

Details of this product and this manual are protected by copyright held by this
company and except for legitimate use by individuals, may not be copied,
reproduced or distributed in whole or in part.

•

Details contained in this manual may be subject to future alteration without notice.

•

Details contained in this manual are believed to be correct but please contact this
company or your dealer if you suspect an error or if a point is not clear.

•

In no event will this company be responsible for the consequences of using this
product or this manual.

December 2002
Published : Mutoh Europe NV, Archimedesstraat 13, B-8400 Oostende, Belgium
Copyright © December 2002, Mutoh Europe NV All rights reserved.

Downloaded From ManualsPrinter.com Manuals

«
...
7
8
9
10
11
...
»

Содержание Falcon II RJ-8000







































































Отзывы:

Нет отзывов

Похожие инструкции для Falcon II RJ-8000

Бренд: Roland Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды