Falcon II RJ-8000 Operation Instructions
26
AP-75080, Rev. 1.1, 04/12/02
2.5.3. Installing the scroller receiver.
Install the scroller receiver according to the following procedure.
Remove the handles from the main unit according to
the following procedure.
Using the assembly tool, loosen the eight
hexagon socket head cap screws.
Remove the following parts :
Handles (2)
Plain washers (8)
Spring rock washers (8)
Hexagon socket head cap screws
(8)
1 = Handle
2 = Plain Washer
3 = Spring rock washer
4 = Hexagon socket head cap screw
5 = Main unit
Install the scroller receivers (left/right) to the main unit
according to the following procedure.
Notes :
The right and left scroller receivers are
not identical.
When viewed from the back of the
main unit, the left scroller receiver has
an adjustment screw on the left side.
Attach the scroller receiver (left) under the
bottom left side of the main unit.
Attach the following parts removed in step 1 to
scroller receiver (left) :
Plain washers (4)
Spring rock washers (4)
Hexagon socket head cap screws (4)
Using the assembly tool, tighten the hexagon
socket head cap screws to install the scroller
receiver (left).
Install the scroller receiver (right) under the
right bottom side of the main unit.
1 = Scroller receiver (left)
2 = Scroller receiver (right)
3 = Plain Washer
4 = Spring rock washer
5 = Hexagon socket head cap screw
6 = Main unit
Installing the scroller receiver is completed.
Downloaded From ManualsPrinter.com Manuals
