Falcon II RJ-8000 Operation Instructions
37
AP-75080, Rev. 1.1, 04/12/02
Step 7 :
The printer starts ink replenishment.
•
During replenishment, the printer executes ink replenishment and pauses alternately.
Step 8 :
When the ink replenishment is completed, the following message is displayed on the operation
panel.
Notes :
Printing for the first time after ink replenishment may lead to the following phenomena.
•
Unclear lines
•
White lines
If any of above occurs, perform the head cleaning 2 or 3 times and check the printing
result. If the printing result does not improve after the head cleaning, wait at least one
hour, and perform the head cleaning again, then check the printing result.
If you still want to make improvements, contact your local dealer.
Downloaded From ManualsPrinter.com Manuals
