Falcon II RJ-8000 Operation Instructions
38
AP-75080, Rev. 1.1, 04/12/02
3.7. MEDIA HANDLING.
3.7.1. Loading roll media.
The procedure for attaching roll media to the printer is explained below.
To load roll media, use the scroller that comes with your printer.
Notes :
You can attach roll media with a 2 inch (outer diameter: 103 mm or smaller; mass
maximum 50 kg) or 3 inch media tube (outer diameter: 150 mm or smaller; mass
maximum 50 kg) to your printer.
To load roll media, follow the steps below.
Caution :
When setting roll media, place it on top of a desk or another flat surface.
Setting roll media with the scroller standing up may damage them.
Step 1 :
Slide and remove the movable flange from the scroller.
1 = scroller
2 = movable flange
Step 2 :
When using roll media with a media tube diameter of 2 inches, remove the movable media
stopper and fixed flange adapter.
1 = Movable media stopper
2 = fixed flange
3 = adapter
Downloaded From ManualsPrinter.com Manuals
