MUTOH ValueJet VJ-1604, Руководство по обслуживанию

Страница: 233 / 422

VJ-1604 Maintenance Manual 5 Self-Diagnosis Mode
5-35 Rev.-00
(The following shows a case for Bi-D 240 Low Print 1)
Prints the pattern by using 2A nozzle line.
* Both Uni-D / Bi-D High should be adjusted in the same procedure.
A: Media feed direction
B: Adjust the setting value so that these point matches.
C: Executed adjustment item is printed like this.
Bi-D 240: Bi-Lo/Hi 240 CPS
Bi-D 320: Bi-Lo/Hi 320 CPS
Bi-D 240B: Bi-Lo/Hi 240 CPS-Banner
Bi-D 320B: Bi-Lo/Hi 320 CPS-Banner
* Either “Lo“ or “Hi“ is displayed where explained as “Lo/Hi“ above.
(The following shows a case for Bi-D 240B Low Print 2)
Prints the pattern by using 2A nozzle line.
* Both Uni-D / Bi-D High should be adjusted in the same procedure.
A: Media feed direction
B: Adjust the setting value so that these point matches.
Bi-Lo
240CPS
Banner
2A 2A 2A 2A 2A 2A 2A 2A
- + - + - + - + - + - + - + - +
B C
A
Bi-Lo
240cps
Banner
4B 4A 3B 3A 2B 2A 1B 1A
- + - + - + - + - + - + - + - +
B C
A