MUTOH ValueJet VJ-1604, Руководство по обслуживанию

Страница: 373 / 422

VJ-1604 Maintenance Manual 9 Troubleshooting
9-51 Rev.-00
5 8. Does ink tube have
bend, scratch, or leak?
• Replace damaged ink
tube and check if
cleaning operation
causes ink inflow after
each replacement.
• If ink inflow is
confirmed, execute
initial ink charge.
"4.7.10
Replacing Ink
Tube" p.4-102
9. Are the following self-
diagnosis functions
detected as normal
when checked with
specified cartridge
securely inserted?
• Detection of presence
of ink from "Ctrl 2:
Sensor" -> "Sen.3: etc"
-> "12: Ink END"
• Detection of presence
of cartridge from "Ctrl
2: Sensor" -> "Sen.3:
etc" -> "11: Ink NOT"
• Follow the steps for the
message "[KCMY] No
Cartridge".
• After adjustment/
replacement, execute
initial ink charge from
"Update 1: Head Rank"
of self-diagnosis
function.
"(1) Head
Rank" p.5-50
10. Is ink tube in ink
system assembly bent?
• Replace ink system
assembly and check if
cleaning operation
causes ink inflow.
• If ink inflow is
confirmed, execute
initial ink charge.
"4.10.1
Replacing Ink
ID Board
Assembly"
p.4-125
11. Does pump motor
rotate during cleaning
operation?
• Reconnect MAIN board
assembly connector J22,
J23.
• Replace Pump motor
assembly.
• Replace MAIN board
assembly.
"4.4.7
Replacing
MAIN Board"
p.4-49
12. When cleaning
operation is
performed, does
transmission gear
rotate properly?
Replace maintenance base
assembly.
Table 9-11 Symptoms, Check Items and Actions for Printing Problems (Continued)
No. Symptom Check item Action Reference