Muratec MFX-1820 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 112

background image

9

Handling of consumables

Never burn or dispose of the toner cartridge or developing unit in a fire. This could cause any remaining toner to
ignite, resulting in a larger fire and/or burns.

Toner cartridges should not be opened with force. Leaking toner should not be inhaled. Contact with skin should
also be avoided. Cartridges should be stored out of children reach. If your skin get in contact with toner clean it
under floating water and soap. In case of skin irritation please consult a doctor.

IMPORTANT

•  Do not store the toner cartridge, developing unit, drum unit or paper in any of the following places:
    • Places exposed to fire
    • Places exposed to direct sunlight
    • Places subject to high temperature and/or high humidity
    • Places subject to rapid temperature changes
    • Dusty areas
    • Inside a car, left for a long time
•  Do not directly touch the photoreceptor surface of the drum unit, or expose it to direct sunlight. This could

cause defects in printing quality.

• Do not leave the drum unit, developing unit, or toner cartridges upside down or on an incline. This could cause

defects in printing quality.

• Do not disassemble the drum unit, developing unit, or toner cartridge.
• Protect the drum unit, developing unit, and toner cartridge from shocks and vibration.
• Do not remove the drum unit, developing unit, and toner cartridge from their packaging until you are ready to

use them.

Daily maintenance

• The fuser unit and area around it inside the machine are extremely hot when operating. When you clear the

paper jam or inspect inside, be careful not to touch around the fuser unit. It may cause burns.

• When clearing paper jams or replacing the toner cartridge, be careful not to get toner powder into your eyes

or mouth. If the toner gets in your eyes or mouth, immediately flush with clean water and seek medical assis-
tance.

• Be careful not to stain your hands or clothes with the toner. If your hands or clothes get stained, wash them

immediately with cold water. The stains may become permanent if washed using warm water.

• Do not perform any operations not described in this manual.

«
...
7
8
9
10
11
...
»

Содержание MFX-1820

















































































































Отзывы:

Нет отзывов

Похожие инструкции для MFX-1820

Бренд: Xerox Страницы: 310

Бренд: GE Страницы: 16

Бренд: imagistics Страницы: 57

Бренд: Partner Страницы: 34

Бренд: MIMAKI Страницы: 2

Бренд: DAKEWE Страницы: 94

Бренд: Oki Страницы: 57

Бренд: Printekmobile Страницы: 2

WorkCentre 7970

Бренд: Xerox Страницы: 268

Бренд: Rimage Страницы: 217

Бренд: Citizen Страницы: 44

Бренд: SEWOO Страницы: 24

Бренд: Aficio Страницы: 92

Бренд: Xerox Страницы: 34

Бренд: Loadrite Страницы: 16

Бренд: DataCard Страницы: 2

Бренд: DataCard Страницы: 2

Бренд: Tharo Systems Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды