Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 18 / 165

8. Before adjusting the seeding depth and accessories, make sure that the tractor is
turned off, the key is removed from the ignition and the parking brake is engaged.
1
pc
9. Beware of pressurised hydraulic hoses 1
pc
10. Ensure that the tractor’s parking brake is engaged and the marker ball valve is in
the closed position before performing the calibration test.
Ensure that the markers have settled in the transport position and their ball valves
have been closed before moving.
1
pc
11. Read the operation and maintenance manual carefully before operation. 1
pc
Figure. 3.3. - 3. Right side of the seed and fertiliser drill, rear view
Table. 3.3. - 7. Right side labels of the seed and fertiliser drill, rear view
1. Falling hazard, do not climb on top of the wheel 2 pcs, at both ends of the
working platform
2. Falling hazard 2 pcs, at both ends of the
working platform
3. Crushing and impact hazard when lifting and
lowering the markers
2 pcs, on both markers
4. Adjustment direction, increases clockwise 1 pc
5. Adjustment direction, increases counterclockwise 1 pc
Operation and maintenance
manual
Cerex 300
1.00
17 (156)