Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 93 / 165

2951
2952
2953
4. Disconnect the drawbar of the seed and fertiliser drill from the tractor’s hitch or the wheel
packer from the tractor’s link arms.
6.15. Emptying the hoppers
6.15.1. Emptying the hoppers to the calibration tray
If the hopper is almost empty, the seed or fertiliser is directed to the calibration tray
through the feeders and the tray is emptied. Instructions on performing the calibration
test are provided in chapter 6.7. CALIBRATION TEST.
6.15.2. Emptying the hoppers through the coulters
Figure. 6.15.2. - 101. Bottom ap open
1. Open the bottom ap (1) of the seed or fertiliser side for the hopper to be emptied.
When emptying the seed hopper, open the seed side bottom ap, and when
emptying the fertiliser hopper, open the fertiliser side bottom ap.
Figure. 6.15.2. - 102. Calibration test crank
2. Use the calibration test crank (1) to rotate the feeders.
Emptying can be enhanced with compressed air to blow all seeds and fertiliser
out of the hoppers and feeders.
Operation and maintenance
manual
1.00 Cerex 300
92 (156)