Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 76 / 165

Figure. 6.6. - 76. Working platform stairs
1. Lower the machine to the operating position in accordance with section 6.2. RENDERING
THE MACHINE TO OPERATING POSITION and lower the working platform stairs (1).
Figure. 6.6. - 77. Hopper tarp
2. Detach the two loops (2) of the hopper tarp (1).
3. Pull the cord (3).
There is a spring inside the tarp that will roll up the tarp. Never let go of the tarp,
but hold the end until the tarp is open.
4. Fill the hopper(s) with seeds and/or fertiliser.
DANGER
Never go under a lifted load.
DANGER
Make sure that nobody is on top of the seed and fertiliser drill or inside the
hoppers when the hoppers are being lled.
DANGER
Avoid breathing seed dressing dust and fertiliser dust. The seed dressing causes a
serious health risk.
DANGER
Read the material safety data sheet of the dressing agent and fertiliser and pay
attention to their warnings.
It is recommended that the hoppers be lled from the side.
We recommend that you open the bulk bags using a knife with a long handle or a
pruning hook.
5. Close the tarp (1) and attach the two tarp loops (2).
6. Fold the working platform stairs up.
When raised, the stairs will be at an approximately 40 degree angle to the
working platform.
Operation and maintenance
manual
Cerex 300
1.00
75 (156)