Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 69 / 165

2930
1. Adjust the width of the feeder roller to the settings provided in the seeding table by using
the screw-type control wheels on the right-hand side of the hopper.
The seeding tables are provided in section 6.4. SEEDING QUANTITIES.
The control wheel (1) is for seeds and control wheel (2) is for fertiliser. If the
machine is equipped with fertiliser remote control, there is no fertiliser control
wheel.
The seed quantity increases when the seed control wheel is turned clockwise. The
fertiliser quantity increases when the fertiliser control wheel is turned clockwise.
The main scale of seeding quantity is on the control wheel lock (3) and the
secondary scale on the control wheel rim (4).
Figure. 6.5.5. - 65. Feeder roller
Fed quantities increase when the roller (1) is inserted into the feeder and
decrease when the roller is pulled out of the feeder.
6.5.6. Adjusting the feeding quantity with chain gears
If the seed and fertiliser drill is not equipped with a gearbox, the rough adjustment of
the feeding quantity is carried out with the chain gears and the ne adjustment by
adjusting the width of the roller.
Operation and maintenance
manual
1.00 Cerex 300
68 (156)