Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 30 / 165

Counter and marker stop
Tramline counter and the marker side do not change.
Used when lling if the machine must be lowered.
1. Power button
The controller switches off when the button is pressed
and held for 3 seconds.
2. Selection button for
marker operation
Switches the markers to automatic or manual mode
3. Arrow button
A marker is activated when the left or right arrow on the
button is pressed.
The target quantity of electronic remote control (7) can
be changed by the set interval (default 5%) by pressing
the up or down arrow.
4. Tramline counter stop
Stops the tramline counters (8)
This can be used when work is interrupted and
during lling
5. Tab change and
counter increase
button
The tab on the user interface changes when this button
is pressed and held for 3 seconds.
The tab number is displayed in the left-hand side of the
icon (6); the icon is displayed on each tab.
By pressing the button once, the value of the tramline
counter increases by one.
Operation and maintenance
manual
Cerex 300
1.00
29 (156)