Multitech MultiVOIP 200, Руководство пользователя

Страница: 27 / 97

27
Chapter 3 - Software Loading and Configuration
Note: Only change the DTMF gain under the direction of Multi-Tech Technical Support
supervision.
18 The Fax group enables you to send and receive faxes on the selected voice/fax channel. You
can set the maximum baud rate for faxes in the drop-down list in the Fax group. If you do not
plan to send or receive faxes on a given voice/fax channel, you can disable faxes in the Fax
group.
19 You can set up billing options for inbound and/or outbound calls by checking them in the
Billing Options group and then typing in the charge in cents per x seconds.
20 Password protection can be enabled for outbound and/or inbound calls on the selected voice/
fax channel. If you enable password Authentication on inbound or outbound calls, you need
to also enter a password of up to 14 numeric characters in the Password field.
A user attempting to access the voice/fax channel will be repeatedly prompted with a series of
two short tones. At this point they must enter the password from their dtmf keypad to access
the voice/fax channel.
21 The Automatic Disconnect option limits call duration to the number of seconds entered in the
Timer: (sec) field. The default value of 15 seconds can be changed to any other value up to
65,535 (roughly 18.2 hours).
Note: After configuring a given channel (1 or 2), you can copy that channel’s configuration to
the other channel by clicking the Copy button. Everything on the Voice/Fax tab will be copied
to the other channel.
If your country/region is not the default USA, click the Regional tab and proceed to step 22;
otherwise, proceed to step 23 to begin building your phone directory database.
22 To change the Tone Pairs on the Regional tab, click the Country/Region down arrow and
highlight your specific country or region.
The Tone Pairs group parameters change per your choice. Click OK when finished. Proceed
to step 23 to begin building your phone directory database.