Multitech MultiVOIP 200, Руководство пользователя

Страница: 35 / 97

35
Chapter 3 - Software Loading and Configuration
10 If you selected the FXO interface and are using Touchtone dialing, you can set up the DTMF
gain (or output level in decibels - dB) for the higher and lower frequency groups of the DTMF
tone pair. Make your selections in the drop-down lists in the DTMF Gain group. Note: Only
change the DTMF gain under the direction of Multi-Tech Technical Support supervision.
11 The Fax option enables you to send and receive faxes on the selected voice/fax channel. You
can set the maximum baud rate for faxes in the drop-down list in the Fax group. If you do not
plan to send or receive faxes on a given voice/fax channel, you can disable faxes in the Fax
group.
12 You can set up billing options for inbound and/or outbound calls by checking them in the
Billing Options group and then typing in the charge in cents per x seconds.
13 Password protection can be enabled for outbound and/or inbound calls on the selected voice/
fax channel. If you enable password Authentication on inbound or outbound calls, you need
to also enter a password of up to 14 numeric characters in the Password field.
A user attempting to access the voice/fax channel will be repeatedly prompted with a series of
two short tones. At this point they must enter the password from their dtmf keypad to access
the voice/fax channel.
14 The Automatic Disconnect option limits call duration to the number of seconds entered in the
Timer: (sec) field. The default value of 15 seconds can be changed to any other value up to
65,535 (roughly 18.2 hours).
Note: After configuring a given channel (1 or 2), you can copy that channel’s configuration to
the other channel by clicking the Copy button. Everything on the Voice/Fax tab will be copied
to the other channel.
If your country/region is not the default USA, click the Regional tab and proceed to step 15;
otherwise, proceed to step 16 to setup your phone directory database.
15 To change the call progress signaling for your Country/Region, click on the down arrow and
highlight your specific country or region.
The Tone Pairs group parameters change per your choice. Click OK and you are returned to
the main menu.
16 From the main menu, click Phone Book to display the Phone Directory Database dialog
box.