Multitech MultiVOIP 200 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 97

background image

64

MultiVOIP 200 User Guide

Remote Management

This section describes typical client applications that can be used to configure the MultiVOIP
remotely. It is important to note that although any subsequent changes to configuration can be made
using these applications, the initial setup and configuration of the MultiVOIP must be done on the
local PC, using the MultiVOIP software provided with your unit.

Although establishing access to the MultiVOIP varies between applications, the configuration
functions mirror those of the MultiVOIP software. For more information on MultiVOIP software, refer
to

Chapter 4 - MultiVOIP Software

.

Telnet

A typical Telnet client application is described next. The MultiVOIP has a built-in Telnet Server that
enables Telnet client PCs to access the MultiVOIP. A typical Telnet client is allowed to configure the
MultiVOIP. In addition, the MultiVOIP can be remotely accessed and configured from any where on
the Internet through its Web interface.

The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run. The
Telnet Server option has to be selected from the Applications Setup dialog box using the MultiVOIP
Configuration icon. Double click on the Telnet icon (or shortcut) and a blank Telnet screen is
displayed. Click Connect | Remote System and the Connect dialog box is displayed. Select (or
enter) a Host Name (the IP address of the MultiVOIP).In this example, the Host Name is
192.168.2.8.

When you enter a valid Host Name (IP address) and click on the Connect button, you are
immediately connected to the target MultiVOIP and the MultiVOIP Telnet Server screen is displayed.

MultiVOIP Telnet Server Menu

The MultiVOIP Telnet Server menu provides three basic options: Voice over IP Configuration, Phone
Directory Database, and Phone Directory Configuration. A further option enables you to close the
Telnet session.

«
...
62
63
64
65
66
...
»

Содержание MultiVOIP 200


































































































Отзывы:

Нет отзывов

Похожие инструкции для MultiVOIP 200

Бренд: Pathport Страницы: 3

Mi Smart Home Kit

Бренд: Xiaomi Страницы: 4

Бренд: CloudGate Страницы: 25

926 Gateway Light

Бренд: Midas Страницы: 10

Бренд: Ruckus Wireless Страницы: 2

Бренд: Carotron Страницы: 20

PowerConnect J-SRX240

Бренд: Dell Страницы: 160

PowerConnect J-SRX210

Бренд: Dell Страницы: 182

Dell Edge Gateway 3002

Бренд: Dell Страницы: 22

PowerConnect J-SRX100S

Бренд: Dell Страницы: 44

SonicWall SRA 1600

Бренд: Dell Страницы: 57

CONNECT RETH001

Бренд: CAME Страницы: 32

WPG-150 - Wireless Video Extender

Бренд: ViewSonic Страницы: 3

BEST Wi-Q WQXM-PG

Бренд: Dormakaba Страницы: 51

Бренд: Omron Страницы: 11

Бренд: Omron Страницы: 78

Бренд: engelmann Страницы: 23

Бренд: engelmann Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды