Multitech MultiVOIP 200 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 97

background image

60

MultiVOIP 200 User Guide

Introduction

This chapter provides procedures for viewing or changing the configuration of a remote unit. Two
methods are provided to access a remote unit; the first method is modem based and the second
method is using IP. Within the IP method, three applications can be used: 1) LAN-Based using TFTP
(Trivial lFile Transfer Protocol), 2)Telnet as a client application, or 3) a standard web browser on the
Internet.

Remote Configuration

Remote configuration requires the MultiVOIP software to be loaded on the local PC. The local PC
then controls the remote MultiVOIP either via the modem connection or the LAN.

Modem-Based

To remotely configure a MultiVOIP, a local PC needs to be connected to a dial-up line and the
MultiVOIP software configured to call the remote MultiVOIP. The remote MultiVOIP needs to have a
modem connected to a dial-up line and the Command Port. Once the connection to the remote unit is
made, you can change the configuration as you see fit. Once the configuration is changed, you can
down load the new configuration to the remote MultiVOIP. Refer to the Modem-Based Remote
Configuration Procedure in this chapter to remotely configure a MultiVOIP.

1

At the remote site, remove the serial cable from the PC to the Command Port connector on

the back panel of the MultiVOIP.

2

At the remote site, connect a special cable (Remote Configuration Cable) from the Command
Port connector on the back panel of the MultiVOIP to the RS232 connector on the modem.
The special cable is a serial cable with male connectors on both ends. Refer to Appendix B
for cable details.

Connect the modem to your local telephone line.

Provide your telephone number to the person verifying your configuration.

Configure the remote modem for 19200 baud and turn on Force DTR.

3

At the main site, connect your local PC to a modem that is connected to a dial-up line.

4

Install the MultiVOIP software on the local PC. When installed, click Start | Programs |
MultiVOIP 200 | Configuration Port Setup, or double click on the Configuration Port icon
in the MultiVOIP 200 program group.

5

The MultiVOIP 200 Setup dialog box is displayed.

«
...
58
59
60
61
62
...
»

Содержание MultiVOIP 200


































































































Отзывы:

Нет отзывов

Похожие инструкции для MultiVOIP 200

Бренд: IFM Electronic Страницы: 9

Бренд: BAPI Страницы: 4

Бренд: TIS Страницы: 5

Бренд: CHERUBINI Страницы: 16

Бренд: ProSoft Technology Страницы: 86

Бренд: OleumTech Страницы: 104

Бренд: Wintec Страницы: 14

IZAR IoT GATEWAY Compact

Бренд: Diehl Страницы: 4

Бренд: NETGEAR Страницы: 53

M2M CONTROL C660

Бренд: Infranet Technologies Страницы: 36

Бренд: ZKTeco Страницы: 20

Бренд: ProSoft Technology Страницы: 104

Бренд: Odin TeleSystems Страницы: 36

Бренд: Planet Networking & Communication Страницы: 19

Бренд: ZyXEL Communications Страницы: 5

Бренд: Wildix Страницы: 14

Бренд: Magnum Страницы: 16

Бренд: ZyXEL Communications Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды