MultiOne 6 Series, Инструкция по эксплуатации

Страница: 56 / 80

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
54
/76
9 MAINTENANCE
9.1 General warnings
See par. 3.4.
9.2 Safety status of the machine
The machine is in safety state when:
1) The machine is stopped not steered on firm and level ground.
2) The lifting arm is lowered and the eventual attachment on the ground.
3) The engine is off (see par. 8.3.6).
4) The controls are in neutral position.
5) The parking brake is inserted (see par. 8.3.7).
6) The key has been removed from the control panel and stored in a safe place.
9.3 Installation safety block on the lifting arm
When performing maintenance on the machine and you need to raise the lifting arm, you must insert the retention bracket.
Proceed as follows:
1) Start on the machine.
2) Raise completely the lifting arm.
3) Turn off the machine (see par. 8.3.6) keeping the arm raised.
4) Remove the bracket from the slot located under the driving seat (FIG. 33 - Ref. 1).
5) Insert the bracket (FIG. 34 - Ref. 1) to block the lifting arm and fix it with the appropriate knob (FIG. 34 - Ref. 2).
6) Slowly lower the lifting arm to bring the elements of the cylinder in support on the bracket.
1
1
2
FIG. 33
FIG. 34
8- OPERATION