MultiOne 6 Series страница 20 Скачать руководство пользователя

Страница: 20 / 80

MultiOne SRL

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)

/76

4.3.1

Button commands

ATTENTION

THE DISPOSITION OF THE BUTTONS CAN VARY ACCORDING TO THE FITTING OUT.

Ref.

Name

Function

Attachment release

button (option)

Pressed (at maintained action) while multifunction joystick yellow

selector (TAB. 7 - Ref. 5) in “FORWARD” position, it allows the

release of attachment.

Power switch DC12V

Three-position switch, it powers the socket on the lifting arm to operate any electrical

device on attachment assembled to the machine (eg.: chimney on the snow blower).

The switch has three positions:

• Position “Forward”: it powers the socket (eg.: rotation of the

snow blower to the right).

• Position “Central”: it interrups the supply of the socket.

• Position “Backward”: it reverses the polarity of the socket (eg.:

rotation of the chimney of the snow blower to the left).

Sound warning signal

Pressed, it activates the emergency sound warning signal.

Heating switch (option)

3 position switch: it activates the heating of the cabin:

• Pos. “0” (starting position): heating off.

• Pos. “1” (pressed): heating on: first speed of the fan.

• Pos. “2” (pressed again): heating on: second speed of the fan.

DBS switch

(Dynamic Block System)

2 position switch: it allows two wheels (same side, front and rear) to have the same

speed.

It can be inserted on the machine in motion or stopped.

• Pos. “Backward”: all wheels run turn at the same speed and you

get maximum traction.

• Pos. “Forward”: the wheels are free to run at different speed

while steering (eg.: to avoid damaging the work surface).

Parking brake switch

Pressed it activates the parking brake. It should be used only when

the machine stops.

Working lights switch

2 position switch.

• Pos. “On”: it turns on the headlights.

• Pos. “Off”: it turns off the headlights.

Floating system switch

(option)

Pressed it activates the floating system of the lifting arm.

WARNING: The lifting capacity of the arm is reduced and the

function of the parallelogram is inhibited.

Heating seat switch

(option)

Pressed it activates the heating system of the seat.

cont.

4- DESCRIPTION OF THE MACHINE

Содержание 6 Series
















































































Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды

MultiOne 6 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды