MultiOne 6 Series Скачать руководство пользователя

Страница: 34 / 80

MultiOne SRL

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)

/76

Sign

Meaning

DANGER OF CRUSHING

Accidental fall of the lift arm. It is compulsory to insert the retention bracket in the lift arm

during the maintenance of the machine (see par. 9.3).

Code: CM12015.88X47.T01

CRUSHING FOOT DANGER

Accidental fall of the attachment or attachments. It is compulsory to wear the PPE

provided (see par. 4.10).

Code: CM12015.88X47.T02

CRUSHING DANGER

Accidental collision with the machine and/or the attachment. It is compulsory to maintain

a safe distance of at least 10 metres.

Code: CM12015.88X47.T03

DANGER OF CRUSHING HANDS

Accidental fall of the attachment or of the attachments. It is compulsory to wear the PPE

provided (see par. 4.10).

Code: CM12015.88X47.T04

CRUSHING DANGER

Accidental collision. It is compulsory to make sure there are no people, animals and/or

things nearby the machine during the steering phase.

Code: CM12015.88X47.T05

DANGER MINIMUM SAFETY DISTANCE

Maintain a minimum distance from the machine of 10 metres.

Code: CM12015.88X47.T09

DANGER OF INJURIES TO HANDS

Danger of injuries to hands if they come into contact with moving parts in motion.

Code: CM12015.129X47.T06

DANGER OF BURNS AND PROHIBITION OF OPERATIONS WHEN THE ENGINE

RUNNING

Burn risk to contact hot parts.

Code: CM12015.129X47.T07

YOU MUST READ THE INSTRUCTION MANUAL

Remove the key from the control panel and disconnect the battery before any

maintenance operation on the machine.

Code: CM12015.129X47.T08

TAB. 14

4- DESCRIPTION OF THE MACHINE

Содержание 6 Series
















































































Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды

MultiOne 6 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды