manualshive.com logo in svg

MultiOne 6 Series, Инструкция по эксплуатации

Поделиться
Скачать
MultiOne 6 Series Скачать руководство пользователя страница 37

Instruction manual (Translation of the original instructions) 

CM150032EN - 16.06.15 - 05 (11.07.18) 

35

/76

Self-moving Compact wheel loader, articulated frame, equipped with 

multipurpose quick coupler, MULTIONE 6 Series

MultiOne SRL

5 

TRANSPORT AND HANDLING

5.1 

Transport

Generally the machine is transported to the customer by the dealer with their own resources or through a “qualified transport 

company”, that by means of own staff and suitable means for the operation, in compliance with the regulations, provides to 

guarantee the loading, transport and unloading operations with regard to the type of transport (by land, by sea, by air).

5.2 

Handling

The machine, only when on, can be moved independently by means of the four wheels and their controls, on public roads even if 

approved in accordance with the legislation of the country of use.

ATTENTION

TO CHECK FOR APPROVAL FOR ROAD USE PLEASE REFER TO THE REGULATIONS IN FORCE IN THE COUNTRY OF USE.

Otherwise to move and/or transfer the machine can be loaded up on a suitable means (eg. lorry, trailer, etc.), suitable for this use 

and with a sufficient load capacity, using the ramps (optional attachment).

To load the machine on a mean of transport proceed as follows:

1) Place the mean of transport in such a way that the loading platform is level.

2) Check that the ramps have an adequate capacity, are surely fastened to the transport vehicle and not exceeding 30 degrees of 

tilt.

3) Turn on the machine (see par. 8.3.2).

4) It is recommended to back the machine onto the transport trailer and position it so that the heaviest weight (center of balance) is 

towards the front (hitch end) of the trailer (see FIG. 15).

5) Turn off the machine (see par. 8.3.6) and put it in “safe state” (see par. 9.2).

6) Insert the steering retention bracket (see par. 5.2.1).

7) Disconnect the battery with the battery key off (see par. 7.1).

8) Ensure the machine to the platform of the transport vehicle with ropes, belts, wheel clamps suitable for use, using the attachment 

points (FIG. 14 - Ref. 1) on the machine.

WARNING

IT IS COMPULSORY THAT, DURING THE OPERATIONS, IN THE RADIUS OF TEN METRES THERE ARE NO THINGS, ANIMALS OR 

PEOPLE WHOSE SAFETY MAY BE AFFECTED ACCIDENTALLY. 

FIG. 14

1

1

1

1

TRANSPORT AND HANDLING -5

Содержание 6 Series

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды