Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
27
/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
4.5.3
Load diagram
DANGER
IT IS FORBIDDEN TO EXCEED THE LOAD CAPACITY OF THE MACHINE (SEE FIG. 9).
The load diagram shown in FIG. 9 is obtained in accordance with standard ISO 14397-1:2007, and shows the load capacity of the
machine in the different positions of the lifting arm.
The upper curve (FIG. 9 - Ref. B) is referred to a machine with a rear counterweight of 184 kg.
The lower curve (FIG. 9 - Ref. A)
is referred to the machine without counter weight.
The load diagrams are intended with the machine stopped in the position of maximum steering, placed on solid and flat surface, with
75 kg operator in the driving seat (see par. 4.2) and equipped with tyres Tractor model (see par. 4.5.1.1).
ATTENTION
MOVING THE LOAD BARYCENTRE DETERMINES THE CHANGE OF LIFTING CAPACITY OF THE MACHINE.
THE LIFTING INDICATED CAPACITY IS COMPREHENSIVE OF THE WEIGHT OF THE ASSEMBLED ATTACHMENT, SO THE NET
LIFTING IS THE VALUE SHOWN IN THE GRAPHIC MINUS THE WEIGHT OF THE ASSEMBLED ATTACHMENT.
WHEN WORKING ON UNEVEN OR SOFT GROUND WITH OBSTACLES IT IS COMPULSORY TO KEEP THE ATTACHMENT AS NEAR AS
POSSIBLE TO THE GROUND AND REDUCE THE LOAD UNDER THE MACHINE’S LIFTING CAPACITY. THIS WILL MAKE THE MACHINE MORE
STABLE.
In the diagram the load barycentre is reported at 500 mm from the quick coupler, in accordance with standard ISO 14397-1:2007.
It can be noted that during movement of the arm the barycentre changes compared to the starting position and consequently the
load capacity of the machine varies.
FIG. 9
80 70 60 50 40 30 20 in
100
200
300
400
500
600
700
800
900
1000
kg 0
220
440
660
880
1100
1320
1540
1760
1980
2200
lbs 0
A
B
20in
500 mm
DESCRIPTION OF THE MACHINE -4
