MultiOne 6 Series страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 80

background image

Instruction manual (Translation of the original instructions)

CM150032EN - 16.06.15 - 05 (11.07.18)

9

/76

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

MultiOne SRL

2.2

Designation

The machine in question is so named:

Self-moving Compact wheel loader, articulated frame, equipped with multipurpose

quick coupler, MULTIONE

6 Series - Models 6.3 - 6.3+ - 6.3S

N.B. The model of the machine is reported on the statement CE of conformity and on the marking CE applied to the machine.

3

IMPORTANT INFORMATION ABOUT SAFETY

3.1

General instructions

DANGER

IT IS COMPULSORY TO CONTROL CONSTANTLY THE PROPER FUNCTIONING OF ALL SHELTERS AND THE PROTECTION DEVICES

INSTALLED ON THE MACHINE.
IT IS COMPULSORY TO SUBSTITUTE AT THE RIGHT TIME POSSIBLE SHELTERS AND NOT WORKING WELL AND/OR DAMAGED

PROTECTION DEVICES.

DANGER

IT IS FORBIDDEN TO SUBSTITUTE ANY SHELTER, PROTECTION DEVICE OR ANY COMPONENT WITH NON ORIGINAL SUBSTITUTES.
IT IS FORBIDDEN TO TAMPER, EXCLUDE AND/OR TAKE AWAY ANY SHELTER OR PROTECTION DEVICE PLACED ON THE MACHINE.
PARTICULARLY THE ROPS STRUCTURE CANNOT IN ANY CASE BE DRILLED, WELDED OR MODIFIED, IN CASE OF DAMAGE IT

CANNOT BE REPAIRED BUT IT MUST BE SUBSTITUTED BY AN ORIGINAL SUBSTITUTE. WHAT IS ABOVE IT IS VALID UNLESS

THERE IS A DIFFERENT WRITTEN DISPOSITION BY THE MACHINE MANUFACTURER.

3.2

Residual risks

We inform the operator in charge that though the manufacturer has adopted all possible technical structural precautions to make

the machine sure, possibile residual risks remain. They are described in succession.

DANGER

TO MINIMIZE THE EXPOSITION TO RESIDUAL RISKS IT IS COMPULSORY TO RESPECT THE SAFETY SIGNS (SEE PAR. 4.8) AND

WEAR THE INDIVIDUAL PROTECTION (SEE PAR. 4.10) REPORTED IN THIS MANUAL.

WARNING

THE RESIDUAL RISKS REPORTED IN SUCCESSION CONCERN THE MACHINE WITHOUT ASSEMBLED EQUIPPING. WE REFER TO

THE EQUIPPING INSTRUCTION MANUAL FOR THE DESCRIPTION OF THE RESIDUAL SPECIFIC EQUIPPING RISKS.
THERE IS THE RESIDUAL RISK OF INJURIES IN CONSEQUENCE OF FALL OF OBJECTS OR MATERIAL FROM THE POSSIBLE

ATTACHMENT ASSEMBLED TO THE MACHINE. CONSULT THE ASSEMBLED EQUIPPING INSTRUCTION MANUAL TO VERIFY THE

PRESENCE OF THIS RISK.

RESIDUAL RISK N. 1

THERE IS DANGER OF BURN FOR CONTACT IF THE AUTHORIZED OPERATOR GET INTO CONTACT WITH THE HOT PARTS SUCH

AS QUICK CONNECTIONS, HYDRAULIC CYLINDERS, HYDRAULIC PIPES, PARTS OF THE ENGINE THAT, OWING TO PROLONGED

USE OF THE MACHINE CAN REACH HIGH TEMPERATURES.
IT IS COMPULSORY TO RESPECT THE ASSEMBLY PROCEDURES, ATTACHMENT DISASSEMBLY (SEE CHAP. 8) AND ORDINARY

MAINTENANCE PROCEDURES (SEE CHAP. 9) DESCRIBED IN THIS MANUAL.

IMPORTANT INFORMATION ABOUT SAFETY -3

«
...
9
10
11
12
13
...
»

Содержание 6 Series

















































































Отзывы:

Нет отзывов

Похожие инструкции для 6 Series

Бренд: Kato Imer Страницы: 120

Бренд: Eurotrac Страницы: 72

Бренд: Mertz Страницы: 84

Бренд: Woody Страницы: 31

Бренд: Toro Страницы: 11

Бренд: Toro Страницы: 40

Бренд: BOXER Страницы: 89

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды