MultiOne 6 Series страница 40 Скачать руководство пользователя

Страница: 40 / 80

MultiOne SRL

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)

/76

6.3

Attachments

6.3.1

Available attachments

The machine has been planned to be used with multiple attachments assembled to the quick coupler. You can examine the

attachment list accessing the website: www.multione.com and clicking on the icon “attachments”. The list is not reported in this

document because the attachments are always continuously updated and expanded. Each attachment purchased directly from the

manufacturer or from his authorised dealers it is implicitly authorised to be installed on the machine.

DANGER

IT IS FORBIDDEN TO ASSEMBLE NOT SUITABLE AND NOT ORIGINAL ATTACHMENTS TO THE MACHINE.

WARNING

IT IS COMPULSORY TO ADDRESS THE TRUST DEALER TO MAKE SURE OF THE COMPATIBILITY BETWEEN THE ATTACHMENT

AND THE MACHINE.

ATTENTION

THE MANUFACTURER ACCEPTS NO RESPONSABILITY FOR ANY DAMAGE TO PEOPLE, ANIMALS OR THINGS, BY THE

INOBSERVANCE OF THE INSTRUCTIONS DESCRIBED IN THIS MANUAL.

6.3.2

Assembly of the attachments

Procedures of assembly and disassembly are described in chap. 8.

6.4

Backweights

Procedures of assembly and disassembly are described in par. 11.4.

6- ASSEMBLY AND INSTALLATION

Содержание 6 Series
















































































Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды

MultiOne 6 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 6 Series

Отзывы:

Похожие инструкции для 6 Series

Бренды по названию

Популярные бренды