Muller 6609 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 55

Muller 6609 Скачать руководство пользователя страница 7

Mod. 6609d-6612d:

Automatic Forms Cutter

13.12.2006

-7-

Before switching the machine on, test the action of the upper blade as it moves to meet the lower
blade. This is vitally important, as otherwise the cross cutter may be damaged.

1.5 Testing the forms cutter

Before beginning to operate the forms cutter remove the protective covering from the feed plate. If it is not
removed, the paper will become statically charged and will affect the cutting process.

This check is absolutely essential as the machine may have become maladjusted during transport.

Proceed as follows:

1.

Unscrew the housing from the right side wall of the forms cutter.

2.

Slowly turn by hand the large belt pulley to which the connecting rod is fastened. No strong resistance should
be felt.

3.

Raise the upper blade to its maximum position by turning the pulley. From the back of the forms cutter
insert a sheet of paper on the far left between the upper and lower blades and perform a cross cut by
turning the pulley slowly. The cross cutter should begin cutting approx. 10 mm from the left edge.

4.

If necessary adjust the engagement of the blades by turning the adjusting screw .

5.

Screw the housing in position.

6.

Before connecting the power supply check the voltage again.

7.

Connect the power supply. The forms cutter is now ready for operation.

«
...
5
6
7
8
9
...
»

Содержание 6609
























































Отзывы:

Нет отзывов