Mod. 6609d-6612d:
Automatic Forms Cutter
13.12.2006
-29-
1.
Select and start service no. 008.
2.
Select an OMR routine (1-6).
3.
Select the running function allocation number (#00-#32)
4.
Reading the OMR marks:
You must enter a 5-digit decimal number for the pattern of marks (code).
5.
Allocating functions:
Enter a 5-digit decimal number for the desired online output (equipment to be
activated).
3.3.2 Programming the OMR routines
In Section 3.3.1.5, parameter k)
Reader
you were able to select and execute the desired OMR program. If you wish
to enter or compile your own programs, you can use OMR programs 2-6.
Before you can enter a program, the adjustment line must be entered under
parameter k)
.
After accessing the programming level, press INFO and then PROG to get into the service routines. Here you can
program the reader. Carry out the following steps in the given order:
3.3.2.1 Explanation of terms relating to optical mark recognition (OMR)
There are a number of terms relating to the OMR system which should be known to the user and which will be
frequently used.
Form length:
Form length always refers to the
uncut
form. This "real" length must be entered in
parameter b) to avoid producing form length errors.
Print lines:
Line feed in the computer printer can be in steps of
1
/8" or
1
/6". The normal step is 1/6".
The print lines are counted from the top of the form downwards in the direction of feed.
Thus the top line is line 1 (with 12" forms the bottom line is 72). For technical reasons
OMR marks may
not
be printed in the following lines: (see illustration page 30)
- in lines 1 and 2 (begin at 3/6")
Notice:
From software release ...10/96 onwards OMR marks can also be printed in
line 30-33 (= 30/6" - 33/6"). This was not possible with former software.
Reading marks:
The reading marks are printed by the computer printer and should consist of two
underlines next to each other . The underline gives the most reliable results. Two directly
joined underlines are best, since in most cases the tractors of the printer are moved
sideways by the computer operator during printing. If only one underline is used, there
is a risk that the reading head will not be able to detect it. The mark passes to the side of
the reading head and a reading error occurs.
Содержание 6609
