Muller 6609 Скачать руководство пользователя страница 23

Страница: 23 / 55

Mod. 6609d-6612d:

Automatic Forms Cutter

13.12.2006

-23-

.3 The programming level (level 2)

Access to the programming level is only possible wh en the machine is

switched off

. Press and hold down buttons

F1-F4

and

switch on

the machine. Buttons

F1-F4

can be released when the message OK appears on the lower

display.

After the machine has been switched on the programmer can peform various functions.
He can:

- perform all operator functions.
-

enter

all parameters in program slot 00

and save the program in slots 01-83.

- browse through all parameters a) - m) in all programs (00 - 99).

A limited number of service functions are available:

SERVICE

000

Return to program

008

Input OMR routines

078/079

Adjust brightness of display

080-089

Select language

104-107

For OMR precess

3.3.1 Selecting and altering parameters

3.3.1.1 Parameter a)

Label

The

Label

parameter can be used to input program labels or names (e.g. test program). The

labels can be up to twenty characters long and hav e no effect on the function of the machine.
They are intended only as an aid to finding programs. The label always appears during PROGRAM-SELECT.

Taste

- Press Input

and

- Select letters, numbers or special

characters (turn page up or down) (R)

- Current write position =_ (R)

- Exit

Содержание 6609
























































Результаты поиска

Содержание 6609

Отзывы:

Muller 6609, Руководство по эксплуатации, Страница: 23 / 55

Результаты поиска

Содержание 6609

Отзывы: