Muller 6609, Руководство по эксплуатации, Страница: 26 / 55

Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-26-
3.3.1.5 Parameter k) Reader
Parameter k) is used to set whether or not an optical mark recognition (OMR) system is to be used, or whether
the machine is to operate online-equipment. The OMR system reads marks (the code) on the form, each of which
indicates a special function (e.g. collecting or en veloping). There are 6 OMR program slots. In each of these slots
a complete OMR program can be entered. In addition the OMR routine for the function ONLINE #00/#01 can be
set.
Key to numbers:
0 No OMR (neither the preset counter nor the reading head is active; no interface dialog will be carried out
with on-line equipment)
1 Standard OMR routine (fixed program)
2-6 OMR programs which can be written by the user
7 Routine for cut at adjustment line
8 Reserved for special jobs
9 OMR routine for direct channel. The marks read by the forms cutter will be evaluated in some other system,
e.g. the enveloping machine or the black box. All information detected is transmitted to the evaluating
system without being processed.
If the OMR system is to be used, the adjustment line position (AL) should now be entered. The mark in the
adjustment line is the first to pass under a reading head during scanning. As a rule this mark has no special
function. When the marks are evaluated it serves only to enhance reading reliability.
F4 - Press Input
F1 - Select routine 0-9 (R)
F2 - Select number (0-9) (R)
F3 - Current write position =_ (R)
F4 - Exit
AL - Adjustment line in this case is line 12
(line distance 1/6" or 1/8" is given in
parameter b) Length)
For OMR programming see Section 3.3.2