Muller Elektronik TANK-Control II, Инструкция по установке и эксплуатации

Страница: 4 / 66

Contents
4 V2.20161017 30252060-02-EN
7.6 Setting the screen brightness and contrast 24
8 "Sensors" menu - configuration and calibration 25
8.1 Opening the "Sensors" menu 25
8.2 Carrying out 100 litre calibration 26
8.3 Carrying out basic initialisation 27
8.4 Entering the tank size 28
8.5 Carrying out calibration 29
8.5.1 Planning calibration 29
8.5.2 Carrying out automatic calibration 31
8.5.3 Entering calibration values manually 35
8.6 Setting the sensor sensitivity 36
9 "Tank Control II" menu - Filling and operation 38
9.1 Opening the "Tank Control II" menu 38
9.1.1 Opening the "Tank Control II" menu on the control unit 39
9.1.2 Opening the "Tank Control II" menu on the terminal in the tractor cab 39
9.2 Calculating the volume of spray required 40
9.3 Filling the tank 41
9.4 Displaying the workable area 44
9.5 Controlling external devices 44
9.5.1 Activating and deactivating external devices 44
9.5.2 Changing the mode of the external devices 46
9.5.3 Viewing the configuration of the external devices 47
9.5.4 Using a filling pump 48
9.5.5 Using a ball valve 49
9.5.6 Using an agitator 50
10 Using two sensors 53
10.1 Adding a second sensor 53
10.2 Configuring the second sensor 54
11 Configuring external devices 55
11.1 Configuring a filling pump 55
11.2 Configuring a ball valve 56
11.3 Configuring an agitator 57
12 Maintenance and technical data 59
12.1 Simulating the fill level 59
12.2 Managing system settings 59
12.3 Technical data 61
13 Appendix 63
www.ROLTRONIK.pl