8
"Sensors" menu - configuration and calibration
Setting the sensor sensitivity
36
V2.20161017
30252060-02-EN
Calibration points
Float height in mm
Fill level in l
You have set the tank size.
You have calibrated an identical tank and have the individual values to hand.
1.
Open the "Sensors" menu.
2.
Press:
>
>
⇨
The following screen will appear:
3.
Press
to activate manual input.
⇨
A cursor appears on the screen.
4.
Select the fill level or float height that you want to change.
5.
Press this key:
⇨
The data input screen appears.
6.
Enter the settings required. Use the values from the identical tank.
7.
Press this key:
8.
Repeat steps 4 to 7 for all the values you want to change.
9.
Press
when you have finished inputting the data.
⇨
You have completed the manual input process.
Setting the sensor sensitivity
The liquid in the tank moves during travel. This means that the float position also changes constantly.
You will see that the fill level on the display increases and decreases all the time.
If the sensor is too sensitive to water movement, you can reduce its sensitivity.
If the sensitivity is high, the fill levels displayed are updated faster. If the sensitivity is low, the fill
levels displayed are updated more slowly.
Procedure
8.6
www.ROLTRONIK.pl
Содержание TANK-Control II
Страница 65: ...w w w R O L T R O N I K p l...
Страница 66: ...w w w R O L T R O N I K p l...
