manualshive.com logo in svg

MTU 12V4000C*5 series, Руководство по эксплуатации

Поделиться
Скачать
MTU 12V4000C*5 series Скачать руководство пользователя страница 19

1.7 Standards for warning notices in the text and highlighted

information

DANGER

In the event of immediate danger.
Consequences: Death, serious or permanent injury!
• Remedial action.

WARNING

In the event of a situation involving potential danger.
Consequences: Death, serious or permanent injury!
• Remedial action.

CAUTION

In the event of a situation involving potential danger.
Consequences: Minor or moderate injuries!
• Remedial action.

NOTICE

In the event of a situation involving potentially adverse effects on the product.
Consequences: Material damage!
• Remedial action.
• Additional product information.

Warning notices

1.

This manual with all safety instructions and warning notices must be issued to all personnel involved in oper-
ation, maintenance, repair, assembly, installation, or transportation.

2.

The highest level warning notice is used if several hazards apply at the same time. Warnings related to per-
sonal injury shall be considered to include a warning of potential damage.

Highlighted information

Important

This field contains product information which is important or useful for the user.
This information must not refer to hazards related to personal injury or material damage.

MS15041/03E 2018-08

| Safety  | 17

TIM-ID: 0000040578 - 006

Содержание 12V4000C*5 series


















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды