MTS Systems TFIR-31LAN series, Руководство по эксплуатации

Страница: 88 / 104

- 86 -
Term Command Description
Image save
IMGVIEW=a
Preparation for transmitting the saved image
a=1; Preparation for last saved image
(*)
a=2; Preparation for the 2nd to last saved image
a=3; Preparation for the 3rd to last saved image
a=4; Preparation for the 4th to last saved image
IMGCLEAR Clear all stored image
7.12 LAN Settings
Term Command Description
SET=LAN Set to default for all LAN settings
?LAN Get the list of settings for LAN connection
IPADR=aaa.bbb.ccc.ddd/ee
Set IP address and subnet mask.
e.g. IPADR=192.168.101.40/24
IPPORT=aaaaa Set Port number
GWADR =aaa.bbb.ccc.ddd
Set default gateway address
?who Get the status for LAN settings
?netstat Get the status for TCP/IP connection
?version Get the model name and firmware version
LAN settings
discon aaaaa
Disconnect the specified TCP/IP connection forcibly
aaaaa; Port number (Decimal)
7.13 General Operation
Term Command Description
Initialization SET=DFT Reset to factory default
Save WSETS Save settings to internal flash memory
Buzzer buz=a
a=0; Buzzer OFF a=1; Buzzer ON
(*)
(Except start-up period)
Digital I/O CHATT=a
Debouncing time
a=0; None
(*)
a=1; 10ms a=2; 20ms
GOOUT=a a=0; GO output is holded until next SYNC input
a=100 to 20000; GO output time [unit:ms] a=300
(*)
NGOUT=a a=0; NG output is holded until next SYNC input
a=100 to 20000; NG output time [unit:ms] a=300
(*)
DOUT1=a
a=0; Disable a=1; GO(Good Read)
(*)
a=2; NG(No Read)
a=3; Ready a=4; Busy1 a=5;Busy2
DOUT2=a
a=0; Disable a=1; GO(Good Read) a=2; NG(No Read)
(*)
a=3; Ready a=4; Busy1 a=5;Busy2
Log output
PRNTBOOT
Boot trace transmission
PRNTLOG
Log trace transmission
PRNTOUTPUT
Output trace transmission