MTS Systems TFIR-31LAN series, Руководство по эксплуатации

Страница: 84 / 104

- 82 -
7.5 Camera Control (2) (for Table Mode)
Term Command Description
Camera Control
Mode
AGC=T Set in Table mode
(*)
Number of
Tables ENABLEDDMTB
L=a
a=1 to 8 a=8
(*)
e.g.) Table #1, #2, #3 are enabled and Table #4 through $8 are disabled
in case of a=3. In case of a=1, Table Mode will work the same as
Fixed Gain Mode.
Editing Table
number
EDITDDMTBL=a
a=1 to 8 a=1
(*)
Set the table parameters after the editing Table number should be set.
Copy Table
settings CPDDMTBL=a,b
or a,b-c
The settings of Table #a are copied to Table #b.
The settings of Table #a are copied from Table #b through Table #c.
7.6 Camera Control (3) (for Table Mode)
Term Command Description
Decode area
DDMwindow=a,b
a=0 to 3 (Horizontal) b=0 to 3 (Vertical)
0 : 100% (H: 752 V: 480)
(*)
1 : 75% (H: 564 V: 360)
2 : 50% (H: 376 V: 240)
3 : 25% (H: 188 V: 120)
Illumination
Control
DDMlight=a
a=2; Internal illumination is OFF
a=3; Internal illumination is ON (with pulsed operation) when capturing
(*)
Illumination
Intensity DDMbrightness=
a Brightness level is set in 50 steps
a : 0 to 50 (0 : Off, 50 : Brightest
(*)
)
Internal
Illumination
DDMled=c,b
Set the type of internal illumination source
TFIR-31LAN-H
(Both type spot and diffused can be used in reading)
c=0; Disable spot type
c=1; Enable spot type
b=0; Disable diffused type b=1; Enable diffused type
TFIR-31LAN
(Both spot type A and B can be used in reading)
c=0; Disable spot type-B
c=1; Enable spot type-B
b=0; Disable spot type-A b=1; Enable spot type-A
Note: Refer to section 7.7 for the default table settings.
Shutter Speed DDMshutt=a
a=0 to 8
0; 1/60 [sec] 1; 1/125 2; 1/250
3; 1/500 4; 1/100 5; 1/2000
6; 1/4000 7; 1/6000 8; 1/8000
Note: Refer to section 7.7 for the default table settings.
Extra gain value DDMexgain=a
a=1 to 15
Note: Refer to section 7.7 for the default table settings.
Black Level
adjustment
DDMblack=a
a=0; Disable
a=-127 to +127
Note: Refer to section 7.7 for the default table settings.
Image
Preprocessing DDMpreproc=
a,b,c,d,e
Set the type of preprocessing
a,b,c,d,e; (Refer to section 7.8)
Note: Refer to section 7.7 for the default table settings.